Nitsuko 1232 - Room Monitor

Other Intercom Features
¾
4-52
¾
OPERATION:
To unlock/lock the door after contacting the Doorphone:
<KTS>
1. Press FLASH key to unlock the door.
2. Press FLASH key again to lock the door.
<SLT>
1. Flash Hookswitch to unlock the door.
2. Flash Hookswitch again to lock the door.
The door can be locked automatically when doorphone call is terminated. When using the automatic
lock feature, skip step 2.
Note: If you use Recall key on the SLT, you must enter the system data(#95-1) for the Flash time of SLT.
RELATED SYSTEM DATA:
#56: Relay Contact Assignment
#88: Door Relay Timer
#95-1: SLT Hook Detection Time
n
nn
n Room Monitor
DESCRIPTION:
Room Monitor lets one extension monitor (listen to) the environmental sounds in an area or room
containing another extension. Several extensions can monitor the same extension; however, only one
monitored extension can be assigned in a system.
STATION APPLICATION:
KTS
OPERATION:
To activate or cancel Room Monitor at the extension to be monitored:
1. Lift handset.
2. Press ICM key. (TX-Z 824/1232/2464 only) (Note)
3. Press OPAC.
4. Press FLASH.
- MON flashes fast on TD/TXD type telephone while Room Monitor is activated.
- MIC flashes fast on BTD/BTXD type telephone while Room Monitor is activated.
5. Hang up.
Note: If Program #75-D is 0 (No tone), skip Step 2 (TX-Z 824/1232/2464).
To activate or cancel Room Monitor at the monitoring extension:
- Do not lift handset.
1. Press OPAC.
2. Press FLASH.
- MON flashes intermittently on TD/TXD type telephone while Room Monitor is activated.
- MIC flashes intermittently on BTD/BTXD type telephone while Room Monitor is activated.
This feature can be stored under the One-touch key.
RELATED SYSTEM DATA:
#19-D: Room Monitor