Nitsuko 1232 - How to Confirm VAU Message

¾ 7-3-1-4 ¾
How to Confirm VAU Message
- To Confirm VAU Message
Display Indication Operation and Information
##SUN# 25# 12:00PM
PLY.DISA.MSG#>##
1. Lift handset or press SPK. (See Note)
2. Dial 932.
If Busy
- VAU unit is not inserted in the system.
- Voice Paths are occupied.
- User operates at extension other than #10.
#
# SUN# 25# 12:00PM
PLY.DISA.MSG#>01
3. Dial VAU Message No. (01 - 24)
(For Example : Message No. 01)
(Refer to "Table of VAU Message".)
Information
- If user dials VAU Message No. which was not
recorded,
Dial Tone may
be sent.
##SUN# 25# 12:00PM
PLY.DISA.MSG#>01
4. Dial *.
5. Playback the message from handset or built-in
speaker.
If Busy
- User dials Message No. other than specific No.
Information
- When recorded contents has been finished, 1-
beep tone (400 Hz, 0.5 sec.) will be sent.
- After confirmed, return to Step 4.
##SUN# 25# 12:00PM
10##############
6. Hang up or press SPK.
Note : When Program #75-D is 0 (No tone), press ICM
key to seize Intercom after lifting handset.