Other Features
¾ 4-77 ¾
OPERATION:
To switch to Business mode:
1. Lift the handset or press SPK key.
2. Press ICM key. (See Note)
3. Press OPAC key.
4. Dial 73.
To switch to Room Status mode:
1. Lift the handset or press SPK key.
2. Press ICM key. (See Note)
3. Press OPAC key.
4. Dial 74.
To switch to Wakeup mode:
1. Go Off-Hook or press SPK key.
2. Press ICM key. (See Note)
3. Press OPAC key.
4. Dial 75.
Note: If Program #75-D is 0 (No tone), skip Step 2.
These functions can be assigned to Line key, One-Touch key, or DLS key. (Function No. 24:Business,
No.25: Room Status, No. 26: Wakeup) When assigned, the corresponding key will light to indicate the
mode. The mode switching operation is effective only in on-hook status. The default mode is
Business.
The LED indication and status in each mode are as follows:
LED Business Room Status Wakeup
Light Busy Check in Wakeup call set
Extinguish Idle Check out
0.1 sec On/0.1 sec OFF DND set Maid required No answer to Wakeup call
0.5 sec ON/0.5 sec OFF MW set Maid in room
0.4 sec On/0.1 sec OFF Ringing Reserved
0.1 sec ON/0.1 sec OFF/0.1 sec ON/0.7 sec OFF Unavailable
RELATED SYSTEM DATA:
#62: DSS Console Port Assignment
u
Room Status
DESCRIPTION:
When the DSS console is in Room Status Mode, Room Status can be changed at No. 10 extension or at
all extensions according to Program #80-2-B.
STATION APPLICATION:
KTS, SLT
To Next Page
Loading...