EasyManua.ls Logo

Nitsuko 1232 - DUD (Direct Universal Dialing) Call

Default Icon
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
¾ 7-2-2-2 ¾
DUD (Direct Universal Dialing) Call
Description
NX7E-3FAXU-A1 card also provides DUD with Voice Announce feature.
When there is an incoming call from outside caller on Fax / DUD Line (assigned by Program
#67), the system automatically answers and sends Greeting Message (Message No.2) to
outside caller. The outside caller can access the desired extension by dialing 1 digit (0 to 7
for Extension No.10 to 17).
<< Example Message for Message No.2 >>
Thank you for calling. This is Nitsuko Corporation. Please dial the desired extension No.
“1” to “7”, or dial “0” to Operator.
In case the desired extension is in idle status ...
Only dialed extension shall ring. However, the other extension user can pickup this call by
using “Call Pickup” operation or press flashing Line Key.
In case nobody answers within assigned time (Program #69-4) ...
Termination Message (Message No.5) is sent to outside caller and this call shall be
terminated.
In case the desired extension is in busy status ...
There are 3 cases as follows ;
[Case 1] Terminate immediately (Program #68-C : 0)
Termination Message (Message No.5) is sent to outside caller and this call shall be
terminated.
[Case 2] Transfer to the Operator (Program #68-C : 1)
Transfer Message (Message No.4) is sent to outside caller and this call shall be
transferred to the Operator.
[Case 3] Return to previous mode (Program #68-C : 2)
Greeting Message (Message No.2) is sent to outside caller again and another
extension No. can be dialed. If the extension user is also in busy status,
Termination Message (Message No.5) is sent to outside caller and this call shall
automatically be terminated.
In case of no dialing by outside caller ...
Same as “In case the desired extension is in busy status ...”.
Important Notice : 3FAXU-A1 card does not support current DISA feature.

Table of Contents

Related product manuals