Nitsuko 1232 - Last Number Dialing (LND); Preselection

Trunk Outgoing Call
¾ 4-2 ¾
OPERATION:
To obtain outside dial tone using Single Step Access:
- Do not lift handset.
1. Press a Line key. The Line key and SPK key light.
- Dial tone comes over the speaker.
To obtain intercom dial tone using Single Step Access:
- Do not lift handset.
1. Press ICM key. ICM and SPK key light.
- Dial tone comes over the speaker.
RELATED SYSTEM DATA:
#15-E: Single Step Access
u
Preselection
DESCRIPTION:
This feature permits access to an Trunk or ICM call by lifting the handset or pressing the SPK key within
three seconds of pressing a Line or ICM key.
STATION APPLICATION:
KTS
OPERATION:
1. Press a Line or ICM key.
2. Lift handset or press SPK key within 3 sec.
- Trunk Line or Intercom is seized.
RELATED SYSTEM DATA:
#15-E: Single step access
n
nn
n Last Number Dialing (LND)
DESCRIPTION:
The last telephone number dialed on an outgoing call (trunk line) can be redialed. A maximum of 18 digits
are stored.
STATION APPLICATION:
KTS, SLT
OPERATION:
<KTS>
1. Lift handset or press SPK key.
2. Press a Line key.
3. Press LND key.
<SLT>
1. Lift handset.
2. Dial function code. (See Note 1)
3. Dial queuing group number. (See Note 2)
Note 1:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 60
0094
Dial Plan 2
1904
Note 2: Queuing group numbers are 0 to 6 (0: Any line, 1-6: Queuing group No).