¾ 7-3-3-13 ¾
Features on DISA
(Outside caller operation)
1. Call DISA line.
2. Hear VAU Message (No. 02).
3. Dial desired extension number.
4. Hear Personal Message or VAU Message No.07. (Absent Message)
5. Dial 3.
6. Hear VAU Message No. 01.
- An idle Trunk line is seized and the stored mobile phone No. is dialed.
7. Make conversation with the mobile phone user.
Note:
This conversation is same as Trunk-to-Trunk feature. Dial “#”, “#” to finish the
conversation.
n
nn
n Call Information to Pager
DESCRIPTION:
If outside caller left a message to key telephone through DISA line, key telephone automatically dials
pager number which is stored at One-Touch key No.7 and No.8.
STATION APPLICATION:
KTS
OPERATION:
To set Call Information to Pager:
1.
Store the desired pager No. to One-Touch key No.7 (Max. 18 digits including Trunk Access
Code) ,and if the pager No. exceeds 18 digits, store the rest to No.8 (Max. 18 digits).
Note:
The numbers stored at One-Touch key No.7 and No.8 are continuously dialed.
2. . Set Absent Mode
(Outside caller operation)
1. Call DISA line.
2. Hear VAU Message (No. 02).
3. Dial desired extension number.
4. Hear Personal Message or VAU Message No.07. (Absent Message)
5. Dial 1 and leave a message.
- An idle Trunk line is automatically seized and the stored pager No. is dialed after the message is
left by the outside caller.
6. Hang up.
RELATED SYSTEM DATA:
#75-A: Auto-dial Assignment
RELATED FEATURES:
Direct Inward System Access (DISA)
One-Touch Dialing
To Next Page
Loading...