Trunk Incoming Call
¾ 4-14 ¾
n
nn
n Incoming Trunk Access
DESCRIPTION:
Trunk lines can be grouped into a maximum of 30 groups. The line groups assigned to each extension
can access for incoming calls and the audible assignments (day and/or night mode ringing) for the
extensions. Up to two incoming line groups can be assigned to an extension. An extension user can
answer an incoming call on a particular line group only if the extension has Incoming Trunk Access to
that group. When an extension is assigned incoming access to a line group, the lines in the group appear
under the Line keys (KTS).
STATION APPLICATION:
KTS, SLT
OPERATION:
<KTS>
To answer an outside call by Direct Pickup:
1. Lift handset or press SPK key.
2. Press flashing Line key.
To answer an outside call by Dial Pickup:
1. Lift handset or press SPK key. (See Note)
2. Dial 96 (TX-Z 824/1232/2464).
Dial 92 (TX-Z 308)
Note: If Program #75-D is 0 (No tone), press ICM key after Step 1 to seize Intercom. (TX-Z 824/1232/2464)
<SLT>
1. Lift handset.
2. Dial 06 (or 96). => Check your dial plan.
RELATED SYSTEM DATA:
#02: Line Group Assignment
#03-C: Common Use Line Assignment
#07: Incoming Trunk Access/Audible
#16-A: Ringing Trunk Off-Hook Access
n
nn
n Trunk Off-Hook Signaling
DESCRIPTION:
Trunk Off-Hook Signaling provides an extension user with an audible indication of an incoming Trunk call
while already on a call: the busy extension user hears muted ringing if on a handset call or one short
burst tones (0.5s ON/15s OFF) if on a Handsfree call.
STATION APPLICATION:
KTS
OPERATION:
To answer a Trunk Off-Hook signal:
1. Press HOLD to put an outside call in progress on hold or hang up the call in progress. Intercom calls
must be hung up since they cannot be put on hold.
2. Press the flashing Line key.
RELATED SYSTEM DATA:
#04-B: Trunk Off-Hook Signaling
To Next Page
Loading...