Nitsuko 1232 - One-Touch Feature Access

Other Features
¾ 4-72 ¾
RELATED SYSTEM DATA:
#03-A: DISA Line
#03-B: DISA Line Access
#08-A: Instrument Type
#31: Trunk-to-Trunk Cut-off Timer Assignment
n
nn
n One-Touch Feature Access
DESCRIPTION:
This feature permits to store the features under the One-Touch, Line or DLS keys so they can be used to
access the following features instead of dialing/pressing function code in [ ]. See descriptions and
operations of each features for detailed procedure.
Loop Key (No. 14) can be assigned only to Line
key which is not defined.
01: Alarm <= [OPAC-50]
02: Timer <= [OPAC-51]
03: Day/Night Mode <= [SPK-ICM(TX-Z 824/1232/2464 only)-TRFR-#] (See Note)
04: Monitor <= [OPAC-FLASH]
05: Monitored <= [SPK- ICM(TX-Z 824/1232/2464 only)-OPAC-FLASH] (See Note)
06: Recall Trunk Display <= [SPK- ICM(TX-Z 824/1232/2464 only)-OPAC-CHECK] (See Note)
07: Repeat Dial key <= [OPAC-1]
08: Repeat Dialing (Hurry up) <= [OPAC-2]
09: Directory Dialing (Line) <= [DC-6]
10: Directory Dialing (ICM) <= [DC-4]
11: I-Hold Release <= [SPK- ICM(TX-Z 824/1232/2464 only)-OPAC-3] (See Note)
12: Restriction Release <= [OPAC-DC]
13: External Call Forward Mode (DISA) <= [OPAC-70]
14: Loop Key <= [None]
22: Conversation Record (TX-Z 824) <= [CONF-95]
23: Conversation Record (TX-Z 1232/2464) <= [CONF-95]
24: DSS Console Business Mode (TX-Z 1232/2464) <= [SPK-ICM-OPAC-73]
25: DSS Console Room Status Mode (TX-Z 1232/2464) <= [SPK-ICM-OPAC-74]
26: DSS Console Wakeup Mode (TX-Z 1232/2464) <= [SPK-ICM-OPAC-75]
Note : If Program #75-D is 0 (No tone), skip pressing ICM (TX-Z 824/1232/2464).
STATION APPLICATION:
KTS