Intercom Outgoing Call
¾ 4-35 ¾
n
nn
n Intercom Link Increase
DESCRIPTION:
There are 2 intercom links provided in the TX-Z 308, 6 intercom links in the TX-Z 824 System, and 10
intercom links in the TX-Z 1232/2464 System. One link is reserved if Background Music is used in TX-Z
824/1232/2464 system. If a DSS console is connected to TX-Z 1232/2464, it also occupies a link.
Intercom Link Increase allows unused Trunk line circuits to be used as Intercom links, providing
increased Intercom calling capabilities. The Intercom Hold/Conference feature is disabled when Intercom
links are increased.
STATION APPLICATION:
System
OPERATION:
Not applicable.
RELATED SYSTEM DATA:
#45: Intercom Link Increase
n
nn
n Intercom Call
DESCRIPTION:
Intercom Call allows extension-to-extension conversation. The system can be programmed for one of
two Intercom Signaling modes: ringing or voice announce. When voice announce is programmed, an
Intercom call signals the called extension with a beep (not ringing). After the beep sounds, the caller can
make a voice announcement over the speaker of the called extension.
Regardless of the signaling mode programmed, an extension user can change it on a per call basis. For
example, a ringing Intercom call can be changed to a voice announced call by dialing a code.
STATION APPLICATION:
KTS, SLT
OPERATION:
To place an Intercom call:
<KTS>
1. Lift handset or press SPK key. (See Note 1)
2. Dial extension number.
To convert a ringing call into a voice announced call, or vice versa, dial 1.
<SLT on Dial Plan 1>
1. Lift handset.
2. Dial 7, wait for dial tone.
3. Dial extension number.
To convert a ringing call into a voice announced call, or vice versa, dial 1.
<SLT on Dial Plan 2>
1. Lift handset.
2. Dial extension number.
To convert a ringing call into a voice announced call, or vice versa, dial 1.
Note 1: If Program #75-D is 0 (No tone), press ICM key after Step 1 to seize Intercom. (TX-Z 824/1232/2464)
Note 2: Call Monitor, Speakerphone and Single Step Access provide ways to place Intercom Calls without lifting the
handset.
RELATED SYSTEM DATA:
#19-B: Intercom Call Type
#75-D: Key Telephone Off-Hook Mode Selection
To Next Page
Loading...