Nitsuko 1232 - DLS Console (TX-Z 824;1232;2464)

Other Features
¾ 4-74 ¾
OPERATION:
To adjust LCD contrast for KTS with LCD:
- Do not lift handset.
1. Press the Vol (up) or Vol (down) to increase/decrease LCD contrast while the phone is idle.
To adjust Speaker Volume:
1. Press the Vol (up) or Vol (down) to increase/decrease speaker volume while the phone is handsfree
mode.
To adjust Handset Receiver Volume:
1. Press the Vol (up) or Vol (down) to increase/decrease handset receiver volume.
To adjust Ringing Volume:
1. Press the Vol (up) or Vol (down) to increase/decrease ringing volume while the phone is ringing or
idle mode.
RELATED SYSTEM DATA:
#18-D: Handset Receiver Volume
n
nn
n DLS Console (TX-Z 824/1232/2464)
DESCRIPTION:
DLS(Direct Line Selection) Console has 24 DLS keys. Each DLS key is assigned as Trunk Line or
Feature Access key.
DLS Console should be connected to KTS with LCD extension
.
On the TX-Z 824 System, this DLS Console is used as DSS(Direct Station Selection) Console. Each DLS
key is assigned to physical port number accordingly.
(Not by extension number which is set in
Program 14.)
DLS Console user can call the other extension only pressing DLS key. TX-Z 824 System
can connect Maximum 3 DLS Consoles.
On the TX-Z 1232/2464 System, Each DLS Console key can be used as Trunk Line or Feature Access
key. Each DLS key is assigned from Trunk Line number 1 to Trunk Line number 24 on the initial
condition. DLS Console user can assign the unused DLS keys as Feature Access Key. TX-Z 1232
System can connect Maximum 8 DLS Consoles. TX-Z 2464 System can connect Maximum 16 DLS
Consoles.
STATION APPLICATION:
KTS with LCD
OPERATION:
– TX-Z 824 –
1. DSS Call (One-Touch Extension Access)
1. Do not Lift Handset.
or
Lift Handset or Press SPK.
2. Press one of DLS key.