Nitsuko 1232 - Intercom Answer; Intercom Incoming Call

Intercom Incoming Call
¾ 4-45 ¾
n
nn
n Intercom Answer
DESCRIPTION:
Intercom Answer (just lifting the handset) lets an extension user answer either signal intercom call or
voice announced intercom call in a single step.
Handsfree Answerback lets a key telephone extension user answer a voice announced Intercom call
without touching the phone.
STATION APPLICATION:
KTS, SLT
OPERATION:
To answer an Intercom call:
<KTS/SLT>
1. Lift handset.
To answer a voice announced call using Handsfree Answerback:
<KTS only>
1. Speak toward the phone. The microphone must be on.
RELATED SYSTEM DATA:
Not Applicable
n
nn
n Call Pickup
DESCRIPTION:
Call Pickup provides two distinct functions: one function applies to Intercom calls and the other to outside
calls.
- Call Pickup allows the extension users to answer Intercom calls and Doorphone call. An Intercom call
that is ringing (or voice-announced) at a particular extension can be answered from any other
extension in the system.
- Call Pickup also allows the extension users to answer a Trunk incoming call, incoming call on a DISA
line, and Unannounced Transfer.
In order to pick up someone else's Intercom call, an extension user must know the number of the
extension that is ringing. If the ringing and answering extensions are in the same Internal Page Zone
(Program #08-C), the # key can be used to pick up the Internal call.
STATION APPLICATION:
KTS, SLT
OPERATION:
To use Call Pickup to answer an Intercom call, incoming call on a DISA line Unannounced Transfer, and
Trunk incoming call on a extension in own pick-up group:
<KTS>
1. Lift handset or press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note1)
3. Dial #. If more than one extension is ringing, this code answer intercom call, unannounced transfer,
incoming call on a DISA line, and Trunk incoming call.
<SLT on Dial Plan1/2>
1. Lift handset.
2. Dial #.
<SLT on Dial Plan 1 only>
1. Lift handset.
2. Dial 8.