Alphanumeric Display TEL Features
¾ 4-62 ¾
OPERATION:
To set Camp-On message:
1. Place Intercom call. Hear busy tone.
2. Activate Intercom Off-hook Signaling (see Intercom Off-hook Signaling on page 4-37).
3. Press
*
.
4. Dial message number (00-49) and
*
.
or
Press One-touch key No.1 or No.2 for personal message, then dial
*
.
or
Press FLASH, edit a message by Message Edit Mode, then press FLASH again and dial
*
.
- Confirmation tone is heard when message is sent.
RELATED SYSTEM DATA:
#04-C: Intercom Off-hook Signaling
u
Reverse Message
DESCRIPTION:
The extension received "Intercom Off-Hook Signaling" can send a text message to calling extension if
this extension user is inconvenient to reply to the signal. For example, an extension user could select the
message 49 "CALL BACK LATER ".
STATION APPLICATION:
KTS with LCD
OPERATION:
- On conversation, "Intercom Off-Hook Signal" received.
1. Press TRFR.
2. Dial message number (1-3).
Dial 1: System common message No.47
Dial 2: System common message No.48
Dial 3: System common message No.49
The default value of 47, 48 and 49 are:
No.47: TAKE MESSAGE
No.48: PLEASE HOLD
No.49: CALL BACK LATER
RELATED SYSTEM DATA:
#04-C: Intercom Off-hook Signaling
n
nn
n Time and Date
DESCRIPTION:
A Display phone connected to port 10 can be used to set the date and time for all Display phones in the
system and for SMDR.
STATION APPLICATION:
KTS with LCD
To Next Page
Loading...