Trunk Incoming Call
¾ 4-19 ¾
To cancel Follow Me (at originating and destination extension):
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note1)
3. Press TRFR key twice.
4. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code. (see Note 2)
3. Hang up.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 69
0 0 959
Dial Plan 2
1 9 059
RELATED SYSTEM DATA:
#28: Unanswered Time
n
nn
n Call Pickup
DESCRIPTION:
(See "Call Pickup" on page 4-45)
n
nn
n Do Not Disturb (DND)
DESCRIPTION:
(See "Do Not Disturb" on page 4-46)
n
nn
n Executive DND
DESCRIPTION:
Executive DND allows two extensions to be specially paired for the purpose of forwarding calls. The
extension designated as the "executive" can forward its incoming calls to the extension designated as the
"secretary". Up to eight such pairs can be formed. Up to all eight executive extensions can be paired with
the same secretary extension, if desired. The executive extension must be programmed for a level of Do
Not Disturb (DND). If, for example, DND level 1 is selected, the executive extension can forward its Trunk
calls - access and audible - to the secretary extension. The secretary extension can reach the executive
extension even while Executive DND is activated.
STATION APPLICATION:
KTS
OPERATION:
To activate Executive DND:
1. Activate DND on the executive extension. (see "Do Not Disturb" page 4-46)
To cancel Executive Call Forward:
1. Cancel DND on the executive extension. (see "Do Not Disturb" page 4-46)
RELATED SYSTEM DATA:
#09: Forwarding Pairs Assignment
#13-B: Do Not Disturb
To Next Page
Loading...