¾ 7-2-2-4 ¾
Fax / DUD (Direct Universal Dialing) Call
Description
When there is an incoming call from outside caller on Fax / DUD Line (which is assigned by
Program #67), the system automatically answers and sends Greeting Message (Message
No.1) to outside caller.
<< Example Message for Message No.1 >>
Thank you for calling. This is Nitsuko Corporation. If you wish to send your Fax Message,
please press “START” key now. If you wish to talk, please wait a moment.
If “START” key is pressed by outside caller within defined time (Program #69-2) ...
(CNG Signal* is detected)
The call shall automatically be transmitted to the connected Fax Machine. The outside
caller (Fax Machine) can make communication with connected Fax Machine.
If assigned time (Program #69-2) has passed ... (CNG Signal* is detected)
Next Greeting Message (Message No.2) is sent to outside caller. The outside caller can
access to the desired extension by dialing 1 digit. (0 to 7 for Extension No.10 to 17, and #
for Fax Machine)
<< Example Message for Message No.2 >>
Please dial the desired extension No. “1” to “7”, or dial “0” to Operator. (or “#” to Fax
Machine)
For the details of DUD features, please refer to “DUD Call”.
Related Programming
Program #68-A : Line Type (should be set to “2”)
Program #68-C : When extension is busy
Program #69-1 : Automatic Answer Time
Program #69-2 : CNG Signal Waiting Time
Program #69-3 : DTMF Signal Waiting Time
Program #69-4 : SLT/FAX Calling Time
To Next Page
Loading...