¾ 2-8 ¾
System Configuration (TX-Z 1232/2464)
Name Description
Quantity
/System
Remarks
1232 2464
NX.E-2464M TXZ ME TX-Z 1232/2464 Main Equipment 1 1
NX7E-12MB Basic mother board
NX7E-12PS Power supply unit
NX7E-24POWU DC/DC power supply, battery charger
Factory equipped units
NX7E-24EPMB-A1 Expansion mother board for 2464
-
1
NX7E-12PS Expansion power supply unit for 2464
-
1
NX7E-24CPU-B1 System main processing unit 1 1
BGM and EXMOH input, 2
relay contacts, and Caller-
ID software included.
NX7E-408U-A1 4-Trunk/8-extension card
Can not be installed to Slot
No.4 and No.8.
NX7E-008U-A1 8-extension card
48
NX7E-24DHU-A1 2-doorphone I/F card 1 1 Daughter board for 24CPU
NX7E-24SMDR-A1 SMDR interface card
NX7E-24SMCID-A1 Caller-ID/SMDR interface card
11
Needed to use Caller-ID
NX7E-8CID Adapter Caller-ID adapter 2 3
1 set for 8 Trunk lines
Complied with Bellcore
Spec.
NX7E-12PFU-A1 12-Trunk line PF transfer card 1 1
12 power failure transfer
circuits for SLT.
NX7E-24VAU-A1 Voice announce unit 1 1
NX7E-8RGU-A1 Ringer unit for Single Line Telephone 1 2
Common unit with TX-Z
824
DX2E-32i/NX7E
BATTERY BOX
External backup battery box 1 1
NP2.6 or equivalent
batteries are required.
NT-S-D6 2-wire doorphone box 2 2 24DHU is required.
NVM-2 Model 1
Voice Mail with 2 ports, 2 hour voice
storage, 50 mailboxes.
As
needed
1 Voice Mail I/F is required
for 2 ports.
NVM-2 Model 2
Voice Mail with 4 ports, 4 hour voice
storage, 50 mailboxes.
As
needed
1 Voice Mail I/F is required
for 2 ports.
NVM-22
Voice Mail with 2-4 ports, 25 hour voice
storage, 50-100 mailboxes.
As
needed
1 Voice Mail I/F is required
per port.
Voice Mail I/F Voice Mail Interface Unit
As
needed
Required for VM
connection
NX.E-24DL TXZ DLS
24 key DLS console for 1st Model Key
Telephone
NX.E-24BDL TXZ DLS
24 key DLS console for 2nd Model Key
Telephone
816
Connected to display type
Key Telephone
NX.E-64D TXZ DSS
64 key DSS console for 1st Model Key
Telephone
NX.E-64BD TXZ DSS
64 key DSS console for 2nd Model Key
Telephone
12
Included in the extension
quantity