Intercom Outgoing Call
¾ 4-43 ¾
<SLT>
1. Lift handset at a phone that received the page.
2. Dial function code. (see Note 2)
3. Dial announced code.
- 80-87, or 88(same zone) : TX-Z 824/1232/2464
- 80-85, or 88(same zone) : TX-Z 308
Note 1 :If Program #75-D is 0 (No tone), skip Step 2 (TX-Z 824/1232/2464).
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
0098
1908
To initiate Meet-Me Conference:
<KTS>
1. Seize ICM.
2. Dial code 81-84 for zones 1-4; 80 for All Call.
3. Page person, announce that pressing CONF key will join Meet-Me Conference.
4. Press CONF key for Meet-Me Conference.
5. Do not hang up. Wait for a reply.
To reply to Meet-Me Conference:
<KTS>
1. Lift handset or press SPK at a phone that received the page.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note)
3. Press CONF key for Meet-Me Conference.
Note 1 :If Program #75-D is 0 (No tone), skip Step 2 (TX-Z 824/1232/2464).
RELATED SYSTEM DATA:
#08-C: Internal Page Zone
#19-A: All Call to External Zone
#20-B: Paging Splash Tone
n
nn
n Flexible Station Numbering
DESCRIPTION:
Flexible Station Numbering allows any extension number, within a specific range, to be assigned to each
telephone port in the system. Originally, extension numbers match telephone port numbers. Refer to the
chart below for the range of extension numbers available to the telephone ports. Three-digit extension
numbers are available only for TX-Z 824/1232/2464.
System
Port
Available Extension
Numbers (2 digit)
Available Extension
Numbers (3 digit)
10-33 10-79 100-799
STATION APPLICATION:
KTS, SLT
OPERATION:
Not applicable.
RELATED SYSTEM DATA:
#14: Station Numbering
To Next Page
Loading...