Nitsuko 1232 - System Assignment

¾ 6-31 ¾
System Assignment
Program 15, 16, 17, 18
SYSTEM ASSIGNMENT 0 1 2 3
Lamp shift mode
(0 or 1)
0 = disable
1 = Enable
( ) ( )
Night service(0 or 1) 0 = All Tenant
1 = Each Tenant
( ) ( )
Automatic trunk access
(0-3)
0 = Disable
1 = Press SPK and queuing group No.
2 = (On-Hook) Dial 0
3 = 1 + 2
( )( )( )( )
Exclusive hold
(0 or 1)
0 = Disable
1 = Enable
( ) ( )
Single step access 0 = Disable
1 = Enable
( ) ( )
Ringing trunk off-hook
access (0-2)
0 = Disable
1 = Tenant answer
2 = Ring answer
( ) ( ) ( )
Recall trunk off-hook
access (0 or 1)
0 = Disable
1 = Enable
( ) ( )
SLT specified Trunk access
(0 or 1)
0 = Only seize Trunk line
1 = Seize Trunk line and pick up held
line
( ) ( )
Add-on conference setup
mode (0 or 1)
0 = Add one by one
1 = Add 5 parties at once
( ) ( )
Multi-line conference
(0 or 1)
0 = Disable
1 = Enable
( ) ( )
Dial pulse sender speed
(0 or 1)
0 = 10 PPS
1 = 20 PPS
( ) ( )
Make/Break ratio
(0 or 1)
0 = 33%
1 = 39%
( ) ( )
DTMF minimum pause
time (0-2)
0 = High-speed
1 = Mid-speed
2 = Low-speed
( ) ( ) ( )
The number of
Abbreviated Dial (0 or 1)
0 = 100
1 = 200
( ) ( )
Existence of Attendant
for DISA
0 = None 1 = Day
2 = Night 3 = Day and Night
( )( )( )( )
3 minutes warning tone
(0 or 1)
0 = Disable
1 = Enable
( ) ( )
Caller-ID Message
(0 or 1)
0 = Pattern 1
1 = Pattern 2
( ) ( )