¾ 7-3-1-1 ¾
Introduction
A Voice Announce/Record Unit (VAU) can be used with the TX-Z
1232/2464 system. This unit
transmits guidance messages for DISA operation or when the user is not present. This results in
both prompt and accurate operation and handling of incoming calls. The types of messages that
can be used consist of VAU messages shared between systems, and personal messages that are
recorded by the user. Since all of these messages are recorded by the user, incoming calls can be
handled in the user's native language.
VAU Capacity
Voice Announce/Record Unit provides VAU Message which is commonly used in system and
Personal Message which is used and recorded for each extension. VAU Message is recorded,
erased and confirmed from only
#10 extension
. Before using VAU, user needs to record each VAU
Message. As for how to record VAU Message, refer to the " How to record VAU Message". When
power supply is in OFF condition, VAU Message is saved but Personal Message is erased.
CAUTION:
When System Data are initialed, all recorded messages will be erased.
Recording
Time (Sec.)
No. of Phrase
Voice
Path
Remarks
VAU Message 16 32
Common use as
system message
4 256
8 128
12 85
Personal Message
16 64
3
Personal use at
each extension
* Duration of Personal Message can be selected by System Program.
* Total of Personal Message is 1024 sec.
To Next Page
Loading...