¾ 7-2-1-6 ¾
Preparation for Attendant Message
3. To confirm Attendant Message :
Display Indication Operation and Information
##SUN# 25# 12:00PM
PLAY# FAX# MSG#>##
1. Lift handset or press SPK.
2. Dial 962.
##SUN# 25# 12:00PM
PLAY# FAX# MSG#># 2
3. Dial Message Number (1 to 5).
##SUN# 25# 12:00PM
PLAY# FAX# MSG#># 2
4. Dial *.
5. The message shall be sent from Handset or Built-in
Speaker.
##SUN# 25# 12:00PM
10###########v##
6. Hang up or press SPK.
Basic Programming
After installing NX7E-3FAXU-A1 card, the following “Basic Programming” should be done.
Program 67-01 : Fax / DUD Line Assignment
Enter Trunk Line No. which is used as Fax / DUD Line.
Program 67-02 : Fax Port Assignment
Enter Extension port No. that Fax Machine is connected.
IMPORTANT NOTICE !!
NX7E-3FAXU-A1 can support
only 1 Trunk Line
which is assigned by Program
#67-01.
To Next Page
Loading...