Alphanumeric Display TEL Features
¾ 4-61 ¾
To activate/cancel previous message (last time you set message for DND):
1. Press TRFR and
*
.
- When DND message is activated, DND flashes intermittently.
RELATED SYSTEM DATA:
Not applicable.
u
Leave Message with MW
DESCRIPTION:
When an extension user makes an Intercom call to display phone and receives a busy signal or no
answer, this user leave a text message with Message Waiting (MW).
STATION APPLICATION:
KTS with LCD
OPERATION:
To leave a Message:
1. Place Intercom call. Busy or no answer.
2. Dial 0. MW flashes intermittently as confirmation.
- Display shows "LEAVE MESSAGE ?", then you can enter a message. If you replace handset after
this step operation, it is simple message waiting procedure.
3. Dial
*
.
4. Dial message number (00-49), dial
*
.
or
Press One-touch key No.1 or No.2 for personal message, then dial
*
.
or
Press FLASH, edit a message by Message Edit Mode, then press FLASH again and dial
*
.
- A text message is left on called display phone.
To cancel message at message-originated telephone:
1. Press CHECK and #.
- First message appears on the display.
2. Use
*
to advance and use # to backward.
3. Press HOLD to cancel message.
or
Press CLEAR to return to idle condition.
To call back or delete message at message-received telephone:
1. Press CHECK and
*
.
- First message appears on the display.
2. Use
*
to advance and use # to backward.
3. Press ICM to call back.
or
Press HOLD to delete message.
or
Press CLEAR to return to idle condition.
RELATED SYSTEM DATA:
Not applicable.
u
Camp-On Message
DESCRIPTION:
When an extension user makes an Intercom call to display phone and receives a busy signal, call can not
be connected. This user can send a text message. Intercom Off-hook Signaling (#04-C) must be enabled
at the called extension.
STATION APPLICATION:
KTS with LCD
To Next Page
Loading...