¾ 5-44 ¾
System Data Error Condition
System Data Error Condition
Program
No.
Error Condition
02 - Lowest line number is larger than Highest line number.
08 - KTS has already been connected to the assigned port number.
09 - Secretary's extension is not assigned to DND in Program #13-B.
- Secretary's extension = Executive's extension
- Secretary's extension is assigned to another pair.
10 - Secretary's extension = Executive's extension
12 - Received extension is assigned to DISA in Program #08-A.
13 - Voice Announce Device Port is not assigned to SLT (DP or DTMF) in Program
#08-A.
14 - Extension number is assigned to the other extension number.
21 - In Program #15-D, when system is assigned to enable the Exclusive Hold, each
timer is not set in each System Programming.
34 - Repeat dial data(Waiting time, Calling time or Repeat dial times) is changed to
000 (No function) during the Auto Repeat dial is set by KTS.
62 - Pair extension is assigned to another pair extension.
(Only TX-Z 1232/2464 System)
- Single Line Telephone is assigned to Pair extension.
(Only TX-Z 1232/2464 System)
64 - Personal Message Recording time (64-A) is changed to other value when someone
confirming the recorded message at the same time.
75 - More than 11 extensions are assigned.
79 - Only assigned one of the pairs for Day-Night / Night-Day Setting.
- Same timing is assigned for Day-Night / Night-Day Setting.
To Next Page
Loading...