EasyManua.ls Logo

Nitsuko 1232 - Night Service (Manual;Auto); Ringing;Recall Trunk Off-Hook Access

Default Icon
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Trunk Incoming Call
¾ 4-15 ¾
n
nn
n Ringing/Recall Trunk Off-Hook Access
DESCRIPTION:
Ringing Trunk Off-Hook Access allows a ringing outside call to be answered by just lifting the handset; a
Line key does not have to be pressed. Recall Trunk Off-Hook Access lets a recalling (re-ringing) line be
answered by just lifting the handset.
STATION APPLICATION:
KTS, SLT
OPERATION:
1. Lift handset.
RELATED SYSTEM DATA:
#16-A: Ringing Trunk Off-Hook Access
#16-B: Recall Trunk Off-Hook Access
n
nn
n Night Service (Manual/Auto)
DESCRIPTION:
Night Service puts the night audible (ringing) assignment (Program #7) into effect manually or
automatically. Incoming calls on a specific line group will ring at extensions that are assigned night
audible for that line group. Night Service remains set even if the system power is turned off.
Night Service is available on a system basis or incoming line group basis according to Program #15-B.
1. Night audible assignments go into effect at all extensions in the system. Day audible assignments are
ignored. The extension #10 can activate this Night Service (NT) mode unless DSS Console is
connected.
On the TX-Z 1232/2464 System, Night Service assignment can be activated by the DSS Console. If
DSS Console is not connected, the extension #10 can activate this mode assignment.
2. Night audible assignments go into effect for the extensions that have the same primary incoming line
group as the extension that activates this NT mode. Extensions with a different primary incoming line
group receive ringing according to their day audible assignments. Any extension can activate this
mode.
This NT mode can be activated by any extension in each same primary incoming line group.
Automatic Mode Switching
Automatic Mode Switching (Program #79) allows to switch Day/Night mode according to preprogrammed
time routine for the system. When Automatic Mode Switching places the system in Night Mode, TRFR
blinks red at all key telephones. If the system mode is switched manually at No.10 telephone or DSS, it
overrides Automatic Mode Switching assignment.
STATION APPLICATION:
KTS, SLT, External speaker, Doorphone
OPERATION:
To activate Night Service:
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note)
3. Press TRFR key.
4. Dial #. TRFR lights red.
5. Hang up.

Table of Contents

Related product manuals