Trunk Incoming Call
¾ 4-16 ¾
To activate Night Service:
<DSS>
1. Press NT key. (LED lights red)
To cancel Night Service:
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note)
3 Press TRFR key.
4. Dial #. TRFR extinguishes.
5. Hang up.
To cancel Night Service:
<KTS>
1. Press NT key. (LED extinguishes)
This feature can be stored under the One-touch key.
When NT mode 1 is enabled, the TRFR key lights steadily at all KTSs. When NT mode 2 is enabled, the TRFR key
lights steadily at the activating extension and at all other KTSs with the same primary incoming line group.
Note: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
RELATED SYSTEM DATA:
#07: Incoming Trunk Access/Audible
#15-B: Night Service
#79: Automatic Mode Switching Time
n
nn
n Call Forward
DESCRIPTION:
Call Forward reroutes an extension user's incoming outside calls so they ring at a different extension. An
extension user who activates Call Forward does not lose access to incoming calls. Incoming access is
shared with the receiving (destination) extension, but only the destination extension rings. Calls cannot
be rerouted to an extension in Do Not Disturb. There are four types of Call Forward:
- Call Forward Immediate
All calls transferred immediately to the destination.
- Call Forward when Busy
Calls are transferred only when the extension is busy.
- Call Forward when Unanswered
Calls are transferred only if they are unanswered, and both the destination and the transferring
extension ring.
- Call Forward when Busy/Unanswered
Calls are transferred only when the extension is busy or unanswered, and both the destination and the
transferring extension ring.
STATION APPLICATION:
KTS, SLT
To Next Page
Loading...