¾ 7-3-3-14 ¾
Features on DISA
n
nn
n Message Playback from Outside
DESCRIPTION:
The extension user who sets Absent Mode can playback the left messages from outside through DISA
line. A 4-digit password to listen to the messages can be assigned per extension in Program #76.
STATION APPLICATION:
KTS, SLT
OPERATION:
The extension must be set to Absent Mode.
(Outside caller operation)
1. Call DISA line.
2. Hear VAU Message (No. 02).
3. Dial desired extension number.
4. Hear Personal Message or VAU Message No.07. (Absent Message)
5. Dial 0 and 4 digits password.
Note:
If the password is not correct Error message (VAU Message No.09) is sent.
- Beep tone is sent as a confirmation tone after a left message is sent to the outside caller.
6. Dial “0” to clear the message, “
*
” to play the next message, or “#” to finish.
Note:
If nothing is dialed within the “Dial waiting time (Program#66-2)”, Cut-Off
Message (VAU Message No.05) is sent and this line will be terminated.
RELATED SYSTEM DATA:
#76: Password for Message Playback
RELATED FEATURES:
Direct Inward System Access (DISA)
n
nn
n Waiting Message
DESCRIPTION:
When an outside caller calls to DISA line, Waiting Message (VAU Message No.25: Waiting Message) is
sent to the outside caller repeatedly instead of music on hold while the system is calling the desired
extension. Sending interval time for the message can be set by Program #66-4.
STATION APPLICATION:
System
OPERATION:
To record Waiting Message:
- Refer to How to Record VAU message.
Note:
Waiting Message (VAU Message No.25: Waiting Message) must be recorded before using
this feature.
To Next Page
Loading...