Trunk Outgoing Call
¾ 4-5 ¾
OPERATION:
<All KTS>
To place an outside call:
1. Seize a Trunk line.
2. Press One Touch key which stores desired phone number.
To store a One Touch Dial number:
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note 1)
3. Press DC key and
*
.
4. Press a One -Touch key to store a phone number.
5. Dial phone number to be stored. (One-Touch Key No.1 to No.10 store numbers in F01-F10.)
6. Repeat steps 3 to 5.
7. Press SPK key to exit from One-Touch Dialing entry.
<Only assigned KTS>
To place an outside call:
1. Seize a Trunk line.
2. Press
OPAC
key.
3. Press One-Touch key which stores the desired phone number.
To store a One-Touch Dial number:
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note 1)
3. Press
OPAC
key.
4. Press DC key and
*
.
5. Press a One-Touch key to store a phone number. (One-Touch Key No.1 to No.10 store numbers in
F11-F20.)
6. Dial phone number to be stored.
7. Go to Step 3 to enter another number
or
Hang up or press SPK to finish.
To check stored One-Touch Dial number:
(On-hook condition)
1. Press CHECK key.
2. Press SPK key.
3. Press DC key and
OPAC
key.
4. Press a One-Touch key which stores the phone number.
5. Press CLEAR key to finish.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note2: If the above operations are taken without pressing OPAC key, the numbers stores in F1-F10 are
called.
RELATED SYSTEM DATA:
#17-D: Storage Quantity of Abbreviated Dialing
#75-B: Personal Abbreviated Dial
n
nn
n Toll Restriction
DESCRIPTION:
Toll Restriction determines extension’s ability to make calls. Each extension can be assigned one of the
following six classes per mode (Day/Night). Toll Restriction Class A is the highest and the Class F is the
lowest.
To Next Page
Loading...