Intercom Incoming Call
¾ 4-47 ¾
STATION APPLICATION:
KTS, SLT
OPERATION:
A. To activate DND while the phone is idle:
<KTS>
1. For level 1: Press DND once. DND flashes.
For level 2: Press DND once. DND lights steadily.
For level 3: Press DND once to block Trunk call ringing and Intercom calls.
or
Press DND twice to block just Trunk call ringing. DND flashes.
<SLT>
1. Lift handset.
2. Dial function code. (see Note)
SLT can be set for Level 2 only.
Note:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 62
0 0 952
Dial Plan 2
1 9 052
To cancel DND while the phone is idle:
<KTS>
- Do not lift handset.
1. Press DND once or twice.
- Whichever makes DND extinguish.
<SLT>
1. Lift handset.
2. Dial function code. (see Note)
Note:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 69
0 0 959
Dial Plan 2
1 9 059
B. To activate DND while on a call:
<KTS>
1. For level 1: Press OPAC, DND once. DND flashes.
For level 2: Press OPAC, DND once. DND lights steadily.
For level 3: Press OPAC, DND once to block Trunk call ringing and Intercom calls.
or
Press OPAC, DND twice to block just Trunk call ringing. DND flashes.
To cancel DND while on a call:
<KTS>
1. Press OPAC, DND once or twice.
- Whichever makes DND extinguish.
RELATED SYSTEM DATA:
#13-B: Do Not Disturb
n
nn
n Intercom Hold
DESCRIPTION:
It is possible to place an Intercom call on hold. While on hold, music is sent to the held party. Unlike
Trunk line hold, when an ICM call is held, no other action can be taken by the holding party. Only the
hold-originating station can re-answer this line by pressing the ICM key.
To Next Page
Loading...