Other Intercom Features
¾ 4-51 ¾
OPERATION:
To answer the chime tones from a phone that receives them:
<KTS/SLT>
1. Lift handset. Connection established.
To answer the chime tones from a phone that does not receive them (Call Pickup):
<KTS>
1. Lift handset.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note1)
3. Dial 9 (TX-Z 824/1232/2464).
Dial 939 (TX-Z 308).
4. Connection established.
<SLT>
1. Lift handset.
2. Dial access code 08 or 98. (see Note2)
3. Dial 9.
Note 1: If Program #75-D is 0 (No tone), skip Step 2 (TX-Z 824/1232/2464).
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
0098
1908
To call a Doorphone:
<KTS>
1. Seize Intercom.
2. Dial 88 for box 1, 89 for box 2.
<SLT>
1. Lift handset.
2. Dial 7.
3. Dial 88 for box 1, 89 for box 2.
Note: If SLT set on Dial Plan 2, skip step 2.
RELATED SYSTEM DATA:
#12: Doorphone Call
#20-A: Door Chime Tone Duration
#20-C: Door Alert Tone
#20-E: Existance of Doorphone Box
#61-E: Doorphone Call/Answer
n
nn
n Door Lock Control
DESCRIPTION:
A customer-provided Door Lock Control device can be installed with one of the Doorphones so that the
extension users can lock/unlock that door using their phones. The door can be locked/unlocked while an
extension user is talking to the door box. Relay Contact Assignment must be programmed for the device.
Door relay can be changed to lock/unlock manually, or once the door is unlocked, automatic-lock is
provided according to the assigned timer.
STATION APPLICATION:
KTS, SLT
To Next Page
Loading...