Nitsuko 1232 - Preparation for Attendant Message

¾ 7-2-1-4 ¾
Preparation for Attendant Message
NX7E-3FAXU-A1 card provides 5 types of message which can be recorded by customer.
Before using features of FAXU, all messages should be recorded.
Attendant
Message
Recording Time
(Sec.)
Remarks
Message #1 18 The time is fixed.
Message #2 18 The time is fixed.
Message #3 9 The time is fixed.
Message #4 9 The time is fixed.
Message #5 9 The time is fixed.
Refer to the following example message and record your original message depending on your
requirement.
> Message No.1 : Greeting Message 1
> Message No.2 : Greeting Message 2
Refer to “Description and Operation” for examples.
> Message No.3 : Error Message
This message is sent in case outside caller dials an invalid extension number (dial *, 8, or 9).
Example Message : That is an invalid number, please dial again.
> Message No.4 : Transfer Message
This message is sent in case the incoming call is transferred to the Operator.
Example Message : This line will be transferred to the Operator.
> Message No.5 : Termination Message
This message is sent in case the call is terminated by the system.
Example Message : This line will be terminated.
NOTICE
: All messages can be recorded / erased / confirmed by only No.10 (TEL 1)
i
IMPORTANT NOTICE !!
- When the message is recorded, the voice must be
loud and clear.
- If the system data is initialized after recording the outgoing messages, the recorded
Message also be erased.