¾ 7-1-17 ¾
Caller-ID Table
[ DESCRIPTION ]
Caller-ID information (Name and Number) can be stored in the system's Caller-ID Table (up to 100
tables). When system received Caller-ID information from a Trunk line and received information is
only number (or name), the system displays the name (number) that associated with received
information. In addition, Key Telephone user can make a call using this Caller-ID table. Each Key
Telephone will be cleared when the system data are initialized.
[ OPERATION ]
1. To store a Displayed Caller-ID information to Caller-ID Table
at the ringing extension
.
Display Indication Operation and Information
##SUN# 25# 12:00PM
10##############
(On-Hook condition)
0448111111######
NITSUKO# CORP.###
1. While incoming call is being received.
2. Press OPAC key.
3. DIAL 90.
* An indicated information will be stored to empty
Memoryarea in Caller-ID table.
* When the information has been stored to Caller-ID table,
confirmation tone shall be heard. However, if the system
is following conditions, error tone shall be heard.
(1) KTS is not allowed to edit. (#61-C)
(2) Caller's telephone number information is not available.
(3) Other KTS is storing some information simultaneously.
(4) Caller-ID table is fully occupied.
To Next Page
Loading...