¾ 7-1-16 ¾
Display Indication for Caller-ID Information
5) When caller rejects to display Caller-ID information
Display Indication Operation and Information
##SUN# 25# 12:00PM
10##############
LINE# XX#########
UNAVAILABLE INFO#
or
LINE# XX#########
PRIVATE####
(On-Hook condition)
1. To answer incoming call or a line on hold.
2. Press FLASH key.
* If the extension is not assigned SINGLE STEP ACCESS
(#15-E = 0), then step-2 operation is not required.
3. Press Line key.
Note: Indication contents are as follows;
XX: Line Number
Note 1:
Caller-ID feature can be allocated on a line basis (Program #03-E).
Note 2:
Caller-ID Indication can be assigned on an extension basis (Program #61-B).
Note 3:
Caller-ID information can be stored to Caller-ID table by assigned KTS (Program #61-C).
Note 4:
For the Auto Display Indication, the display can show the first incoming call. If the call is
answered or abandoned, the display will show next incoming call.
Note 5:
The indications “OUT-OF-STATE” and “UNAVAILABLE INFO”, or “OUT OF AREA” and
“PRIVATE” can be selected by Program #18-B.
[ RELATED SYSTEM DATA ]
Program #03-E: CALLER-ID
Program #07: Incoming Trunk Access/Audible
Program #18-B: Caller-ID Message Assignment
To Next Page
Loading...