¾ 7-1-30 ¾
Temporary Memory
[ DESCRIPTION ]
The system has the Temporary Memory area which can store up to 70 (for TX-Z 308/824)/100 (for
TX-Z 1232/2464) information (Tel. No.: max 10 digits, Name: max 15 digits). Caller-ID information
is automatically stored to the Temporary Memory when...
- there is an abandoned call
- incoming Caller-ID information can not be stored to Caller-ID Table due to the Caller-ID Table is
full condition.
If the Temporary Memory is full condition, the oldest Caller-ID information is automatically deleted
and then new information shall be stored.
The Temporary Memory can be used...
- to place an outgoing call by using the stored Caller-ID information.
- to transfer the stored Caller-ID information to the Caller-ID Tables.
[ OPERATION ]
1. To make the outgoing call by using Temporary Memory
Display Indication Operation and Information
##SUN# 25# 12:00PM
10##############
0448111111######
23:56# 30/04/95##
1. Press OPAC key. (On Hook condition)
2. Dial 95. (Check Temporary Memory)
* When the KTS is not allowed to edit (#64-B), error tone
shall be heard and return to the idle condition.
* If a Caller's Name information is not available, the
indication is as shown;
0448111111######
NITSUKO# CORP.###
* If a Caller's Name information is available, the indication
is as shown and the indication can be changed by
CHECK key.
NO# NUMBER# INFO#
23:56# 30/04/95##
* If a Caller's Number Information is not available, the
message is shown in upper column. (NO NUMBER
INFO)
1234567#########
XYZ# CO.,LTD.####
3. Press # key (search the forward information) or
*
key
(search the Backward information).
Caution: The stored information at the Temporary Memory shall be erased when
system power goes off.
Press CHECK key
To Next Page
Loading...