EasyManua.ls Logo

Nitsuko 1232 - DISA (Trunk-To-Trunk)

Default Icon
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Other Trunk Features
¾ 4-34 ¾
n
nn
n DISA (Trunk-to-Trunk)
DESCRIPTION:
Direct Inward System Access (DISA) lets someone outside the system call in on a DISA LINE and place
a call on a system line, bypassing the system operator. A security code is required to place an outside
call (Trunk-to-Trunk), and the Toll Restriction Class assigned to a security code determines the type of
calls that can be placed. The DISA caller must use a DTMF telephone.
When Trunk Line is assigned as DISA Line in Program 03-A,
DISA port can be allocated to any one of
DISA line which must be programmed in Program #08-A with data 1"
.
Voice Announce/Record Unit (VAU) (Optional Item) can be used to the TX-Z 1232/2464 system as voice
announce device for DISA Line. VAU unit provides guidance messages by user-recorded voice on DISA
feature (for outside party) and also for extensions.
STATION APPLICATION:
System
OPERATION:
To use DISA to place a call on a system line (Trunk-to-Trunk):
1. Call the DISA line. The system answers with dial tone or voice recorded message.
2. Dial #.
3. Dial DISA security code. Receive confirmation tone.
4. Dial Queue Group number (1-6) for desired line or dial 9, then two-digit line number. If busy tone is
heard, use either procedure below to disconnect.
5. Dial telephone number including PBX Access Code if required.
6. Dial #. The call rings through.
To hang up the outside call and reuse the DISA line:
1. Dial # and
*
. Hear dial tone.
2. Dial #.
3. Dial DISA security code. Receive confirmation tone.
4. Dial Queue Group number (1-6) for desired line or dial 9, then two-digit line number. If busy tone is
heard, use either procedure below to disconnect.
5. Dial telephone number including PBX Access Code if required.
6. Dial #. The call rings through.
To disconnect both the DISA line and the system line:
(Polarity Reverse Detection is not available)
1. Dial #, #.
This procedure must be used before hanging up.
(Polarity Reverse Detection is available)
1. Hang up.
Refer to the "DISA Operation Flowchart" in this Manual (P. 4-113)
RELATED SYSTEM DATA:
#03-A: DISA Line
#03-B: DISA Line Access
#08-A: Instrument Type
#30: Voice Recorded Message Time
#31: Trunk-to-Trunk Cut-Off Timer Assignment
#46: DISA Security Codes
#47: DISA Security Code Extension Assignment
#48: DISA Toll Restriction Class
#64-D: LED Indication for DISA Incoming Call
#66: DISA Timers

Table of Contents

Related product manuals