Intercom Incoming Call
¾ 4-46 ¾
To use Call Pickup to answer an Intercom call, incoming call on a DISA line Unannounced Transfer, and
Trunk incoming call on a particular extension:
<KTS>
1. Lift handset or press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note1)
3. Dial extension number of ringing phone (TX-Z 824/1232/2464).
Dial
*
and extension number (TX-Z 308).
<SLT>
1. Lift handset.
2. Dial 08(98). (see Note2)
3. Dial extension number of ringing phone.
To use Call Pickup to answer an Doorphone call:
<KTS>
1. Lift handset.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note1)
3. Dial 9 (TX-Z 824/1232/2464).
Dial 939 (TX-Z 308).
<SLT>
1. Lift handset.
2. Dial 08(98). (see Note2)
3. Dial 9.
Note 1: If Program #75-D is 0 (No tone), skip Step 2 (TX-Z 824/1232/2464).
Note2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
0098
1908
RELATED SYSTEM DATA:
#08-C: Internal Page Zone
n
nn
n Meet-Me Answer Paging
DESCRIPTION:
(See "Paging" page 4-41)
n
nn
n Meet-Me Conference Paging
DESCRIPTION:
(See "Paging" page 4-41)
n
nn
n Do Not Disturb (DND)
DESCRIPTION:
Do Not Disturb (DND) blocks incoming calls and Intercom Off-Hook Signaling. An extension user can
activate DND while on a call or while the extension is idle.
There are four levels of DND:
Level 0 => No DND capability
Level 1 => Blocks Trunk call ringing
Level 2 => Blocks Trunk call ringing and Intercom calls
Level 3 => Blocks Trunk call ringing and Intercom calls or just Trunk call ringing
An extension user can still place calls and answer outside calls while the phone is in DND. Outside calls
can be answered since access to the line is not blocked and the Line key still flashes.
To Next Page
Loading...