Trunk Outgoing Call
¾ 4-6 ¾
Class-A: No dialing restrictions.
Class-B: Dials are restricted by DATA-B except dials matching PBX extension call or DATA-F.
Class-C: Dials are restricted by DATA-D2 except dials matching PBX extension call, DATA-C, or DATA-
F.
Class-D: Dials are restricted by DATA-D2 or DATA-D1 except dials matching PBX extension call or
DATA-F.
Class-E: Dials are restricted all outgoing Trunk calls except dials matching PBX extension call or DATA-
F.
Class-F: Intercom calls only.
The DATA (restricted/permitted codes and number length limit) within the Classes must be entered in
programming.
If there are PBX lines, PBX access code must be assigned in programming in order for Toll Restriction to
be properly applied.
Toll restrictions are not applied to lines programmed as Unrestricted Lines.
When the system is placed in night mode by Night Service feature, the Toll Restriction class assignment
for night mode is activated.
STATION APPLICATION:
KTS, SLT
OPERATION:
When an extension user dials a call that is not allowed by the assigned Class, the system automatically
disconnects the line.
RELATED SYSTEM DATA:
#03-D: Unrestricted Lines
#18-C: Abbreviated Dialing Restriction
#35-A: Toll Restriction Class (Day)
#35-B: Toll Restriction Class (Night)
#36: Permitted Codes (DATA-C)
#37: Number Length Limit (DATA-D1)
#38: PBX CO Access Codes (DATA-E)
#39: Common Unrestricted Codes (DATA-F)
#40: Class-B Restricted Codes (DATA-B)
#41: Class-C/D Restricted Codes (DATA-D2)
n
nn
n Walking Toll Restriction
DESCRIPTION:
Walking Toll Restriction lets you temporarily override an extension's dialing restrictions by dialing
programmed security code at that extension. Dialing the code overrides the restrictions set up in Toll
Restriction.
STATION APPLICATION:
KTS, SLT
OPERATION:
<KTS>
1. Lift handset.
2. Press an idle Line key.
3. Press OPAC key.
4. Press DC key.
5. Dial security code.
6. Dial phone number.
To Next Page
Loading...