Nitsuko 1232 - Automatic Off-Hook Trunk Access; Loop Key Trunk Access

Trunk Outgoing Call
¾ 4-12 ¾
n
nn
n Loop Key Trunk Access
DESCRIPTION:
User can assign
only one
Loop Key to one of undefined Line keys. The Loop Key should be assigned on
an unused Line key in advance by using "One-Touch Feature Access". This feature permits access to an
outgoing line by pressing a Loop Key. The trunk line is seized from small number, large number, or
rotated number. This key provides user advantage as follows;
- When the number of Trunk lines connected to the system is larger than the number of Line keys at
user's KTS, user can seize all the Trunk line by pressing the Loop key.
- User can use the Park Hold effectively.
There are 6 types of LED indication.
- System Hold: 0.1 sec ON / 0.1 sec OFF (BLF: Green)
- Exclusive Hold: 0.1 sec ON / 0.1 sec OFF / 0.1 sec ON / 0.7 sec OFF (BLF: Green)
- I-Use: Light (BLF: Green)
- Conference standby: 0.1 sec ON / 0.1 sec OFF / 0.1 sec ON / 0.7 sec OFF (BLF: Green)
- Idle: Extinguish
- All lines are Busy: Light (BLF: Red)
STATION APPLICATION:
KTS
OPERATION:
To seize a Trunk line:
1. Press Loop Key. (Dial Tone is heard.)
* Refer to One-Touch Feature Access for how to assign Loop Key.
To answer the incoming call:
(This feature is available for KTS which is allowed Ringing Trunk Off-hook Access feature.)
1. Incoming call to a Trunk line. (Ringing)
(Loop key is still extinguished.)
2. Lift handset. (Loop key lights Green.)
RELATED SYSTEM DATA:
#64-C: Trunk Line Seizing Order Selection
n
nn
n Automatic Off-Hook Trunk Access
DESCRIPTION:
The assigned extension users can seize an idle Trunk Line by only lifting handset. The operations such
as pressing Line key or dialing Trunk Access Code become unnecessary. This feature is useful for Key
Telephone users who mainly makes outside calls or to connect Fax Machines (Modems) instead of
Single Line Telephones.
STATION APPLICATION:
KTS, SLT
OPERATION:
<KTS>
1. Lift handset or press SPK key. (An idle Trunk Line will automatically be seized.)
Note 1: If all Trunk Lines are busy, no tone will be heard.
Note 2: This disables the user to seize Intercom after lifting handset. Press ICM key before lifting handset to seize
Intercom.
Note 3: Lifting handset when the extension is ringing answers Trunk Line or Intercom call.
<SLT>
1. Lift handset. (An idle Trunk Line will automatically be seized.)
Note : If all Trunk Lines are busy, Busy Tone will be heard.