Intercom Outgoing Call
¾ 4-41 ¾
To display the extension number that left a Message Waiting:
<KTS with LCD>
- Do not lift handset.
1. Press CHECK key.
2. Dial
*
. Extension number is displayed.
3. Press Hold key to clear the Message Waiting Indication.
4. Press ICM key to call back Message Waiting originating extension.
5. To display the next extension number that left a Message Waiting indication, dial
*
again.
6. Press CLEAR to return to normal display.
RELATED SYSTEM DATA:
#80-01-A: Message Waiting
n
nn
n Paging
DESCRIPTION:
Internal Paging lets an extension user make a paged announcement over the speaker of the other
telephones in the system. Any extension can make a page, but only key telephone that are assigned to
an Internal Page Zone can receive a page. There are four types of Internal Paging:
-
Internal Zone Paging
lets an extension user page all the telephones assigned to a particular Internal
Page Zone.
-
All Call Paging
lets an extension user page all Internal Page Zones.
-
Meet-Me Answer/Conference Paging
allows an extension user to page one or more persons, then
reserve an Intercom circuit for 30 seconds so that the paged party/parties can reply. Meet-Me Answer
lets one party reply, while Meet-Me Conference lets up to five people reply and jointly converse.
The system has four zones, numbered 1-4. The system can be programmed to broadcast All Call Paging
over external speakers.
External Zone Paging allows customer-provided paging equipment (speakers, amplifiers, etc.) to be
installed in large, noisy areas (zones) so that extension users can make paged announcements to these
zones. In the system, two external page zone is available.
STATION APPLICATION:
KTS, SLT
OPERATION:
To make an page:
<KTS>
1. Seize Intercom.
2. Dial code.
- 80 for All Call.
- 81-84 for zones 1-4.
- 85 for all external zones
- 86 for external zone 1 (TX-Z 824/1232/2464 only)
- 87 for external zone 2. (TX-Z 824/1232/2464 only)
3. Make announcement.
4. Hang up.
To Next Page
Loading...