Trunk Outgoing Call
¾ 4-10 ¾
OPERATION:
To activate Key Touch Tone:
- Do not lift handset.
1. Dial
*
.
To cancel Key Touch Tone:
- Do not lift handset.
1. Dial
*
. Final Key Touch Tone is heard.
RELATED SYSTEM DATA:
#13-A: Key Touch Tone
n
nn
n Easy Trunk Access
DESCRIPTION:
Easy Trunk Access lets an extension user access an outgoing line without pressing a Line key or dialing
a two-digit line number. A single-digit code automatically accesses an outgoing outside line from smaller
number, large number, or rotated number.
STATION APPLICATION:
KTS, SLT
OPERATION:
To access the first available outgoing line:
<KTS>
1. (On-Hook and Speaker off condition)
2. Dial 0. A line is seized and dial tone comes over the speaker.
<SLT>
1. Lift handset.
2. Dial 9 or 0. (refer to Program #20-D)
RELATED SYSTEM DATA:
#15-C: Automatic Trunk Access
#20-D: Automatic Trunk Access Code for SLT
#64-C: Trunk Line Seizing Order Selection
n
nn
n Queuing Group Access
DESCRIPTION:
Queuing Group Access lets an extension user access the first available outgoing line in a Queuing Group
without pressing a Line key or dialing a two-digit line number. A single-digit code automatically accesses
an outgoing outside line from small number, large number, or rotated number.
STATION APPLICATION:
KTS, SLT
OPERATION:
To access the first available line in a Queuing Group:
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464) (See Note)
Dial 91. (TX-Z 308)
3. Dial Queuing Group number (1-6). A line is seized and dial tone comes over the speaker.
To Next Page
Loading...