Other Features
¾ 4-81 ¾
To cancel Dial Block at Attendant extension (No.10 extension):
(On-Hook condition)
1. Press OPAC key.
2. Dial 9 and
*
.
3. Dial Password (73738).
4. Press HOLD key.
5. Dial the desired extension No. to cancel Dial Block (e.g. 12)
6. Dial
*
to accept. (1 short beep tone shall be heard.)
7. Dial #.
8. Repeat steps 5 -7 to cancel Dial Block for another extension.
or
Press HOLD key to exit.
RELATED SYSTEM DATA:
#35: Toll Restriction Class Assignment
u
Wakeup Call
DESCRIPTION:
Wake-up call can be set or cancelled from each Single Line Telephone extensions and the Attendant
extension. (No.10 extension). When the time comes and ringing time assigned in Program 80-2-D is
over, it recalls the attendant extension until the attendant extension user presses CLEAR key.
STATION APPLICATION:
KTS(No.10 Extension), SLT
OPERATION:
To set Wakeup Call:
<KTS (#10 extension)>
(On-Hook condition)
1. Press OPAC key.
2. Dial 9 and #.
3. Dial extension No. (e.g.12)
4. Press
*
to accept.
5. Dial Hour and Minute in 24 hours mode.
6. Press
*
to accept. (One short beep tone shall be sent.)
7. Return to the idle condition automatically.
<SLT>
1. Lift handset.
2. Dial function code. (see Note 1)
3. Dial time in terms of 24 hour clock. For example, dial 1545 for 3:45 PM.
4. Hang up.
To Next Page
Loading...