Other Features
¾ 4-80 ¾
<SLT on Dial Plan 2>
1. Lift handset.
2. Dial 067 (967) (See Note 2)
3. Dial the extension No. to output Call Charge. (e.g. 18)
4. Dial 6.
5. Hang up.
Note 1: If Program #75-D is 0 (No tone), skip Step 2.
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
0 0 967
1 9 067
RELATED SYSTEM DATA:
#80-2-C: Call Charge Format
#80-2-B: Room Status
#83-B: Optional/Fixed Rate Table Selection
#96: Charge Code Table
#97: Charge Rate Table
#98: Maximum Call Charge
u
Dial Block
DESCRIPTION:
Dial Block can be set or canceled at Attendant extension (No.10 extension). This feature allows the
user to restrict the guests’ outside calls.
STATION APPLICATION:
KTS (No.10 Extension)
OPERATION:
To set Dial Block at Attendant extension (No.10 extension):
(On-Hook condition)
1. Press OPAC key.
2. Dial 9 and
*
.
3. Dial Password (738).
4. Press HOLD key.
5. Dial the desired extension No. to set Dial Block (e.g. 12)
6. Dial
*
to accept. (1 short beep tone shall be heard.)
7. Dial #.
8. Repeat step 5 -7 to set Dial Block to another extension.
or
Press HOLD key to exit.
To Next Page
Loading...