Other Trunk Features
¾ 4-32 ¾
n
nn
n Private Line
DESCRIPTION:
The Private Line feature allows an incoming and/or outgoing outside line to be assigned to only one
extension for exclusive use by that extension. Any outside line can be designated as a Private Line. All
features involving outside lines apply to Private Lines as well - for example, calls are placed and
answered on a Private Line as they are on any other line.
1) Private Line is assigned to an extension as follows:
- A line group must be formed that contains only the Private Line. For example, if line 3 is to be used
as a Private Line, line group XX must have the following entry in Program #02: 02-XX-03-03 (i.e.,
line 03 is the lowest and highest numbered line in the group).
- The line group must be assigned to only one extension in Program #06 and/or Program #07 for
outgoing and/or incoming access, respectively.
2) An extension programmed for the Break-In feature can break into a call on a Private Line.
STATION APPLICATION:
KTS, SLT
OPERATION:
Not applicable.
RELATED SYSTEM DATA:
#02: Line Group
#06: Outgoing Trunk Access
#07: Incoming Trunk Access/Audible
n
nn
n Tenant Service
DESCRIPTION:
Tenant Service allows two or more independent businesses to share the system. Each tenant can be
assigned incoming and/or outgoing outside lines dedicated for its own use. Some features (Extension
calls, Paging calls, Abbreviated Dialing, Attendant Reverting) can be partitioned among the tenants.
Night Transfer can be independently used by each tenant if a "1" is entered in Program #15-B.
STATION APPLICATION:
KTS, SLT
OPERATION:
Not applicable.
RELATED SYSTEM DATA:
#02: Line Group Assignment
#06: Outgoing Trunk Access
#07: Incoming Trunk Access/Audible
#08-D: Tenant Group
#15-B: Night Service
#52: Tenant Feature
#53: Tenant Abbreviated Dial
#54: Tenant Attendant
To Next Page
Loading...