Trunk Outgoing Call
¾ 4-7 ¾
<SLT>
1. Lift handset.
2. Dial 07 (or 97). => (See Note)
3. Dial security code.
4. Dial 9 (or 0). => (See Note)
5. Dial phone number.
Note:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2 Dial at Step 4
00970
19079
RELATED SYSTEM DATA:
#42: Walking Toll Restriction Security Code
#43: Toll Restriction Class Assignment on Security Code
n
nn
n Dial Block
DESCRIPTION:
Dial Block allows you to temporally lock your extension by entering 4 digit personal code so that other
users can not make outside calls from your extension. To have this facility each extension has to be
assigned by system programming.
At No Display Key Telephones, 3-Splash tone is emitted from built-in speaker if somebody tries to make
an outside call while Dial Block is set.
STATION APPLICATION:
KTS, SLT
OPERATION:
To set Dial Block:
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note 1)
3. Dial
*
, # (TX-Z 824/1232/2464)
Dial 95 (TX-Z 308)
4. Dial 4-digit personal code. (See Note 3)
5. Dial
*
.
- Confirmation tone when effective.
- Error tone when not effective.
6. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code. (See Note 2)
3. Dial 4-digit personal code. (See Note 3)
4. Replace handset.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 65
0 0 955
Dial Plan 2
1 9 055
Note 3: You can dial any number as a personal code.
To Next Page
Loading...