Trunk Incoming Call
¾ 4-18 ¾
n
nn
n Follow Me
DESCRIPTION:
When an extension user is away from his/her extension and has to use another extension, Follow Me
reroutes the extension user's incoming outside calls to that extension. There are four types of Follow Me
same as Call Forward.
- Follow Me Immediate
All calls transferred immediately to the destination.
- Follow Me when Busy
Calls are transferred only when the extension is busy.
- Follow Me when Unanswered
Calls are transferred only if they are unanswered, and both the destination and the transferring
extension ring.
- Follow Me when Busy/Unanswered
Calls are transferred only when the extension is busy or unanswered, and both the destination and the
transferring extension ring.
STATION APPLICATION:
KTS, SLT
OPERATION:
To activate Follow Me (at another extension) :
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) ( See Note 1)
3. Press TRFR key and dial 0.
4. Dial originating extension number (your extension No.).
5. Dial option code (0-3). (see Note 3)
- One short beep sounds as confirmation.
- One long beep means calls cannot be rerouted to that extension. (TX-Z 824)
- 3 splash tone means calls cannot be rerouted to that extension.(TX-Z 1232/2464)
6. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code. (see Note 2)
3. Dial originating extension number (your extension No.).
4. Dial option code (0-3). (see Note 3)
5. Hang up.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 630
0 0 9530
Dial Plan 2
1 9 0530
Note 3: Option codes are as follows:
0 =>
Follow Me
Immediate
1 =>Follow Me when Busy
2 =>
Follow Me
when Unanswered
3 =>
Follow Me
when Busy/Unanswered
To Next Page
Loading...