Trunk Incoming Call
¾ 4-17 ¾
OPERATION:
To activate Call Forward:
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note 1)
3. Press TRFR key.
4. Dial destination extension number.
5. Dial option code (0-3). (see Note 3)
- One short beep sounds as confirmation.
- One long beep means calls cannot be rerouted to that extension. (TX-Z 824)
- 3 splash tone means calls cannot be rerouted to that extension. (TX-Z 1232/2464)
6. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code. (see Note 2)
3. Dial destination extension number.
4. Dial option code (0-3). (see Note 3)
5. Hang up.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 63
0 0 953
Dial Plan 2
1 9 053
Note 3: Option codes are as follows:
0 =>
Call Forward
Immediate
1 =>
Call Forward
when Busy
2 =>
Call Forward
when Unanswered
3 =>
Call Forward
when Busy/Unanswered
To cancel Call Forward (at originating and destination extension):
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note 1)
3. Press TRFR key twice.
4. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code. (see Note 2)
3. Hang up.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 69
0 0 959
Dial Plan 2
1 9 059
RELATED SYSTEM DATA:
#28: Unanswered Time
To Next Page
Loading...