Other Features
¾ 4-78 ¾
OPERATION:
To change room status in Room Status mode:
<KTS>
1. Lift the handset or press SPK key.
2. Press ICM key. (See Note 1)
3. Dial
*
, #,
*
.
4. Dial the extension No. to change room status. (e.g. 18)
5. Dial status No. (0 - 5) (See Note 2)
6. Hang up.
<SLT on Dial Plan 1>
1. Lift handset.
2. Dial 67.
3. Dial the extension No. to change room status. (e.g. 18)
4. Dial status No. (0 - 5) (See Note 2)
5. Hang up.
<SLT on Dial Plan 2>
1. Lift handset.
2. Dial 067 (967) (See Note 3)
3. Dial the extension No. to change room status. (e.g. 18)
4. Dial status No. (0 - 5) (See Note 2)
5. Hang up.
Note 1: If Program #75-D is 0 (No tone), skip Step 2 (TX-Z 824/1232/2464).
Note 2: Status Numbers are as follows:
No. Indication Meaning
0 Check In Guest is in the room.
1 Maid Required Guest left the room and cleaning is required for Maid.
2 Maid In Room Guest left the room and Maid is cleaning the room.
3 Check Out The room is vacant, and ready for Check In.
4 Reserve The room is reserved
5 Unavailable The room is out of order.
Note 3:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
0 0 967
1 9 067
Note 4: “Check In” operation is invalid if the Room Status is “Unavailable”. Change the status to “Check Out “before
“Check In” operation.
RELATED SYSTEM DATA:
#80-2-B: Room Status
To Next Page
Loading...