Nitsuko 1232 - Page 343

¾ 7-3-1-3 ¾
How to Erase VAU Message
- To Erase VAU Message
Display Indication Operation and Information
##SUN# 25# 12:00PM
DEL.DISA.MSG#>##
1. Lift handset or press SPK. (See Note)
2. Dial 931.
If Busy
- VAU unit is not inserted in the system.
- User operates at extension other than #10.
##SUN# 25# 12:00PM
DEL.DISA.MSG#>01
3. Dial VAU Message No. (01 - 24)
(For Example : Message No. 01)
(Refer to "Table of VAU Message".)
##SUN# 25# 12:00PM
4. Dial *. (VAU Message is erased.)
(When Erasing finished,
Dial Tone may
be sent.)
If Busy
- User dials Message No. other than specific No.
##SUN# 25# 12:00PM
10##############
5. Hang up or press SPK.
Note : When Program #75-D is 0 (No tone), press ICM
key to seize Intercom after lifting handset.