Nitsuko 1232 - Page 280

• 6-37 •
PROGRAM
TIME ASSIGNMENT TIME
1 = Automatic answer time
#65
Unattendant Message
(000: Disable)
(001-255: 1-255 sec.)
2 = Cut off time
1 = Automatic answer time
(000: Answer at once)
(001-255: 1-255 sec.)
2 = Dial waiting time
(001-255: 1-255 sec.)
3 = Extension calling time
(001-255: 1-255 sec.)
#66
DISA Timers
4 = Waiting time for VAU25
(000 : No function)
(001-255: 1-255 sec.)
1. Wait time for Caller-ID Signal
2. Incoming signal duration timer
3. Caller-ID Signal duration timer
#74
Caller-ID Timer
000: Not time out
001 - 015 : 1 - 15 sec (N=1)
000 - 015 : 0 - 1.5sec (N=2)
000 - 015 : 0 - 750ms (N=3)
000 - 008 : 500 - 900ms
009 - 014 : 1 - 2 sec
015 : 3 sec (N=4)
4. Time for Carrier detection
1 = Conversation timer
#82
Long Conversation Cutoff
Timer
2 = Warning Tone Sending
Timer
#84
Hunting Group Calling Timer
(000: Not to change calling extension)
(001-255: 1-255 sec.)
#88
Door Relay Timer
#89
Pre-pause timer for outside dial
1.Hook detect timer for SLT
2.Incoming signal guard timer
#95
Sub-CPU Timer
3. Call abandon detect timer