¾ 5-8 ¾
Program 6
This program selects the line groups each extension can use for outgoing calls. Up to two outgoing
line groups can be assigned to an extension.
Display Indication Input Data
Initial
OUTGOING# CO# ACC.
#####06-ST-G1-G2
ST. Extension number (10 - System Max)
G1. Outgoing line group 1
00: Not assigned to any group
01 - 30: (Line group number)
G2. Outgoing line group 2
00: Not assigned to any group
01 - 30: (Line group number)
* G1 and G2 shall be defined under Program 02.
(ALL)
G1: 01
G2: 00
Program 7
This program selects the line groups each extension can access for incoming calls and the ringing
assignments (day and/or night mode ringing) for the extensions. Up to two incoming line groups can
be assigned to an extension.
Display Indication Input Data Initial
INC.LINE# ACC/AUD
#####07-ST-X-GPD
ST. Extension number (10 - System Max)
X. No. (1 - 2)
(Cannot input dial)
GP. Incoming line group number
00: Not assigned to any group
01 - 30: (Line group number)
D. Incoming ring type
0: No ringing 1: Day ring
2: Night ring 3: Day and Night ring
* GP shall be defined in Program 02.
(X = 1)
GP: 01
D = 3
[No. 10]
D = 0
[No. 11 -
No. Max]
(X = 2)
GP: 00
D = 0
To Next Page
Loading...