¾ 5-41 ¾
Program 93
This program indicates Main ROM & Sub-CPU version for each Unit.
Display Indication Input Data Initial
SUB# CPU# VERSION
#####93-NN###-DD
NN. Main ROM or Unit number
00 = Main ROM
01 = Sub CPU for TX-Z 308 M.E.
01-03 = Sub CPU for TX-Z 824 M.E.
01-08 = Sub CPU for TX-Z 1232/2464 M.E.
09 = Sub CPU for VAU Unit(TX-Z 1232/2464)
10 = Sub CPU for 3CIDU Unit(TX-Z 308)
10 = Sub CPU for SMDR Unit(TX-Z 824/2464)
11-13 = Class Packa
e 1-3(Caller-ID Adaptor)
14 = Sub CPU for 3FAXU Unit(TX-Z 308)
DD. Version Number
00 -
(Can not enter any dial.)
¾
Program 94
This program enables the Caller-ID Table Clear and Initialization feature.
Display Indication Input Data Initial
CLEAR# I.D.# TABLE
#####94########C
Caller ID Table individual clear
—
Program 95
This program assigns variable timer of SUB-CPU in main equipment for Single Line telephones.
Display Indication Input Data Initial
SUB# CPU# TIMERS##
#####95-N###-TTT
N. 1: Hook detect time for SLT
2: Incoming signal guard timer for SLT
(The time from when the line was cut-off
and to start to detect a next incoming
signal.)
3: Call abandon detect timer for SLT
*On TX-Z 824/1232/2464, Series No. of
408M/208E/008E/408U/008U units shall be 2.0 or
upwards.
(N = 1)
TTT = 080
(N = 2)
TTT = 020
(N = 3)
TTT = 050
To Next Page
Loading...