Nitsuko 1232 - Page 371

¾ 7-3-3-19 ¾
Features on Transfer
STATION APPLICATION:
KTS, SLT
OPERATION:
To set Meet-Me Paging Transfer Mode:
Display Indication Operation and Information
##SUN# 25# 12:00PM
(KTS)
1. Lift handset or press SPK.
2. Press ICM key. (See Note)
3. Press TRFR.
##SUN# 25# 12:00PM
##############80
4. Dial paging number. (80 - 87)
(For Example: 80 is all call.)
##SUN# 25# 12:00PM
10##############
5. Hang up or press SPK. (TRFR key will flash.)
(SLT)
1. Lift handset.
2. Dial 63. (Dial Plan 1)
or
2. Dial 053 (953). (Dial Plan 2)
3. Dial paging number. (80 - 87)
4. Hang up.
Note: When Program #75-D is 0 (No tone), skip Step 2.
To reset Meet-Me Paging Transfer Mode:
(It can be canceled at the
only originating
extension.)
Display Indication Operation and Information
(KTS)
1. Lift handset or press SPK.
2. Press ICM key. (See Note)
3. Press TRFR key twice. (TRFR key will go off.)
4. Press SPK.
(SLT)
1. Lift handset.
2. Dial 69. (Dial Plan 1)
or
2. Dial 059 (959). (Dial Plan 2)
3. Hang up.
Note: When Program #75-D is 0 (No tone), skip Step 2.