¾ 7-3-3-28 ¾
Other Features
To confirm General Message(s)
at receiving extension
: (Cont'd)
Display Indication Operation and Information
Note 4: After confirming message, user can select the
message to be confirmed by dialing
*
or #.
(
*
: Scroll forward, #: Scroll backward)
Note 5: When recorded contents has been finished, 1-beep
tone (400 Hz, 0.5 sec.) will be sent.
To transfer General Message(s)
at receiving extension
:
Display Indication Operation and Information
(KTS, SLT)
1. Listen to a General Message.
2. Dial # and dial desired extension number.
3. Hang up or press SPK.
To erase General Message(s) individually
at receiving extension
:
Display Indication Operation and Information
GENERAL# MESSAGE
MW# FM##10#######
(KTS with Display)
1. Press CHECK and dial
*
.
(For Example: originating extension No. 10)
* User can select the message to be erased by dialing
*
or
#. (
*
: Scroll forward, #: Scroll backward)
##SUN# 25# 12:00PM
2. Press HOLD.
(This message is erased.)
(KTS, SLT)
1. Listen a left message.
2. Dial 0.
3. Hang up or press SPK. (see Note)
Note: When messages are erased, Dial Tone may be sent.